Posted by Sterling from Texas [166.147.123.156] on Saturday, February 23, 2013 at 20:41:35 :
In Reply to: Re: Help needed! Brake bleeding posted by gmharris [71.105.35.169] on Saturday, February 23, 2013 at 20:31:42 :
Ok when the power bleeder is pressured the pedal is firm as it should be. If feels as though it has brakes. After going around the truck numerous times bleeding off the air I decided to press the brake pedal and pump it up and it pressured real good. And then fluid start pouring out the back side of the master. When simply pumping up the pedal using only the cylinder (no power bleeder) it will pump up but then the pedal goes to the floor. Slowly and then no pressure. I've tightened all the fittings. Still wont hold pressure.
Follow Ups: