|
|
Posted by clueless [201.193.142.76] on Thursday, January 10, 2013 at 21:05:56 :
In Reply to: Re: something does not add up there posted by Kaegi [24.16.253.154] on Thursday, January 10, 2013 at 14:54:13 :
or find one in a bone yard or have a custom one made
but the room is there for the taking
i actually think there is enuff room of the late model pump cuz it is lower and could fit under the tank
only one i could find was wider but thinner depth but only by a half and in. but it was a snug fit width wise bolted to the grill through the front clip sheet metal and i welded some tabs on the rad. to bolt up there
basically took up the whole width of the grill opening less one eignth in. on each side and sits in front of the rad. bracket right behind the grill
can t wait to see if the winch fits without hitting it--lol cuz it is snug up against the grill
there is still room to put a thicker core inbetween the bracket on the front rather than rear of it
I got three inches with mine, evern if the rad was an inch thicker you would still be 2 in. from the fan
again you are gonna have to rework the top or adapt something
but most old radiators are junk anyway
both mine are anyway