|
|
Posted by Sherman in Idaho [24.32.202.166] on Sunday, January 06, 2013 at 03:34:15 :
In Reply to: Looking for rear pto chain sprocket posted by Jared cook [63.140.82.186] on Sunday, January 06, 2013 at 00:21:07 :
I don't think there's anything special about it. You should be able to buy one from a "belt and drive" company. There was a gearbox came in my first M37, mounted under the bed, that had in input shaft from the PTO and then two output shafts each of which could be engaged in forward, reverse, or neutral. One of its outputs drove the front winch via a complicated drive line that didn't work very well, and the other had a chain sprocket on it, presumably to drive something in the bed like a welder or contact service truck winch. The shafts on the gearbox were the same size as the PTO output, so the sprocket would fit the PTO. I'd offer it to you, but it's on the gearbox which is at my cabin that's snowed in for the winter. Plus it's pretty rusty.
Follow Ups: