|
|
Posted by Chris Case [75.36.43.15] on Saturday, December 15, 2012 at 14:31:37 :
Pic of my prototype. Bigger pics at link.
Castle style hub protector on a Warn knock-off .
I assume it will work on other brands of single-knob hubs. It won't work on the two lever Dualmatics unless the owner trims the levers, and drills holes in the end for use with a hook to lock/unlock.
There is clearance on this prototype for 9/16 nuts. But the OE studs that use those nuts are far too short. So either I have to make more clearance for 5/8 wrenches, or supply socket head screws. The could be cross drilled for safety wire. Or with hex, locking tabs from other uses may work- I don't think the hard to find Warn locking tabs would be needed.
Sorry, no price yet. I need to work out the final details and time& materials. But expect north of $100.
Follow Ups: