|
|
Posted by Steve G [168.103.52.19] on Sunday, December 09, 2012 at 22:36:19 :
In Reply to: Re: WTB: NP435 posted by Greg Coffin [4.228.135.39] on Sunday, December 09, 2012 at 15:17:53 :
I found out about the spline differences after I sold a big block bell housing and clutch assembly that took the large input shaft. I wanted to keep the trans so we took the shaft off and he brought a 1" from one of his. Later I found it would not bolt up because the tooth count was off.