slant six question


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by junoir copey [174.35.245.105] on Tuesday, October 23, 2012 at 19:15:03 :

I have the core for the 64 power wagom its a 225 slant 6 .Pulling down the core the motor was frozen. I removed the plugs and they looked absolutly perfect, I sprayed some penetrating oil down the plug holes and barred the engine over.The engine hit a hard stop after 180 degrees of rotation.I pulled the rocker cover off and six push rods were like pretzels.I removed the bent P rods and the engine still wont move past half a turn.I found many stuck valves so I sprayed and tapped them free.Still no complete revolution of the crank.The suspense is killing me as to what could have gone wrong with this engine.The slants sixes were almost indistructable and this motor although just a core for renbuilding has me wondering what happened junoir copey



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com