|
|
Posted by Vaughn [99.110.84.2] on Saturday, October 20, 2012 at 10:19:36 :
In Reply to: Lets discuss alignment posted by Tim Holloway [69.54.28.229] on Friday, October 19, 2012 at 18:30:20 :
Toe-in is set at 0 to 1/8 with the vehicle on the ground. Don't use side of tire or rim to take measurements. I use the blue painters tape placed center of tread of both front tires. I use a stick 6 inches, stand it on the ground and vertical against tape to make a horizontal mark across tape. I take my reading either side of tape, below horizontal line using tape measure. Don't use the end of tape measure, use 1 inch mark for a more accurate reading. Drive or roll vehicle forward and use stick to measure the horizontal line. Take tape measurement below horizontal line to determine toe-in.