|
|
Posted by Jerry in Idaho [69.59.83.175] on Friday, October 12, 2012 at 23:13:19 :
In Reply to: Draft Pads posted by Robert Kosusnik [209.112.209.159] on Thursday, October 11, 2012 at 11:56:50 :
Hi Robert. I used a stainless sheet metal scrrew with an oval head and a slight tapered edge, with some matching stainless decorative washers. The washers look like a little volcano. I used the same combination on the headliner and the door panels. Not sure if they are what the factory used, but they look good. Thanks again for the MC core. Jerry