Posted by Steve Elliot on Monday, March 26, 2001 at 9:34PM :
In Reply to: Brake problem posted by John on Monday, March 26, 2001 at 6:30PM :
John,
Since you have bled the brakes I assume you got a good stream of fluid out of the bleed screws. If this is the case then the problem has to be at the wheel. I suspect you haven't got the brakes adjusted properly. Follow the instructions in the owners manual. There is a minor and major adjustment and they have to be done just right. If you don't have the instructions I'll type them out for you. You should have an owner's manual if you don't already have one. Did the brakes pull to the right out of the blue or after you worked on them?
Steve
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |