|
|
Posted by TGP(IL) [64.12.112.103] on Monday, September 17, 2012 at 22:19:59 :
In Reply to: Re: Converting a 6V Fuel Sender to 12V posted by johnd [71.255.216.170] on Monday, September 17, 2012 at 20:13:22 :
Nice write up and explanation.
However he wants to use an early gauge which uses a heated bimetal strip to move the needle. A resistor must be installed between the Ign.(power source) and the gauge.
This is not the usual one wire sender system.
Tom
Follow Ups: