|
|
Posted by Sherman in Idaho [72.47.8.4] on Saturday, August 04, 2012 at 11:44:13 :
Now that I have a source for front motor mounts, I'd like to replace several that have crumbled so there's no rubber between the metal, or are has hard as brick, but it looks like there's no way to get a wrench onto the lower nuts without removing the front support, which requires removing the crankshaft pulley, which probably requires removing the radiator. Has anybody figured out a way to get some sort of wrench up underneath the bracket to get those lower nuts off, with the bracket and engine still in place? I assume I could lift the engine enough to get the rubber mount out from between the bracket and the engine, without having to disconnect anything from the engine, except maybe take the rear motor mounts loose.
It seems like CSCameron raised this issue in the last forum but there wasn't any clear answer about it.
Follow Ups: