|
|
Posted by chris case [75.36.47.108] on Thursday, July 12, 2012 at 11:55:39 :
In Reply to: Re: tolerance on dodge 1947 pw cylinder head posted by Justin [71.59.91.52] on Thursday, July 12, 2012 at 09:11:17 :
Anyway, it is the standard amount for six cylinders, which is more than for 4 cyls.
Taking off .060 is OK ? Final thicknesses seem to vary from 1.990 to 1.905 with most guys measuring theirs at around 1.930.
Follow Ups: