|
|
Posted by Gary in CO [64.234.252.38] on Monday, June 11, 2012 at 22:13:14 :
In Reply to: Re: NP540 GM to Chrysler posted by Kaegi [24.16.253.154] on Monday, June 11, 2012 at 16:57:30 :
Steve, you might be right. Here are my dimensions for the 435 and 540. The 435 was in my '64 TWPW with a poly 318. The 540 had a 315 bell in a '57 D500. You can probably find the right input shaft. Dave Cirillo might be able to help there. My concerns are for enough of the shaft engaging the pilot bearing. I might use an extended pilot bearing. You can also get a 12" clutch with 1-3/8 10 spline. Gar
Follow Ups: