|
|
Posted by Paul(in NY) [12.64.152.53] on Friday, June 08, 2012 at 20:53:17 :
In Reply to: Paul in NY posted by Kaegi [24.16.253.154] on Friday, June 08, 2012 at 20:42:55 :
No Documentation. The local canvas shop that does all kinds of boat covers came up and measured. Went to his shop and sewed it all up. Came back and it fit like a glove. The M37 has 2 fiberglass bows, the W300 has 3.
In both cases, he used a piece of round aluminum extrusion with a slot cut in it. He then sewed a fiberglass dowel on the front end of the cover. The Aluminum extrusion was fastened to the cross bed tool box and then the cover with the fiberglass dowell slid in the aluminum extrusion. The aluminum extrusion/tool box interface was sealed with silicone. The result is a perfectly dry bed in any type of rain storm.
The cost was $500 for either truck, I feel money well spend for a quality job.
There is one picture of him working in my Power Giant Resto/rebuild album
Paul
Follow Ups: