Dan here is a picture


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Paul(in NY) [12.64.158.12] on Monday, May 28, 2012 at 08:29:01 :

In Reply to: hi paul posted by dan m [108.1.88.126] on Monday, May 28, 2012 at 06:56:30 :

Dan, this is a TSC Tractor Supply Tool box. As bought its bright aluminum with a clear coating for protection. I bead blast the box to get rid of the clear coat and
'slightly' roughen the surface for good paint adhesion. I then shoot it in satin black. The red device in the box is a marine battery off/on switch. Since the picture, there is also a battery maintainer mounted in the box. The box is bolted to the running board with .375" bolts. I was going to use .750" bolts but decided it was over kill ha ha ha ha

I cut a few holes in the box and got 2.5" soffit vents. The vents are aluminum. I cut the rear part of the tube so I could have bendable tabs to retain it in the battery box. I wanted the vents to prevent any hydrogen gas build up. The vents have louvers facing down. I have never taken rain water. SInce I dont take her swimming or in deep mud its no issue.

The tool box comes with a riveted on handle. I cut the 2 rivets and just put
10-24 machine screws in to fill the holes. Sorry, I dont have the Tractor Supply Part Number. Its in the catalog and on the store shelfs in this area. Hollar if I can be of further help.

Paul



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com