|
|
Posted by Steve in NJ [173.220.146.99] on Tuesday, May 22, 2012 at 22:09:25 :
In Reply to: Not through the center of the hollow swivel shaft? posted by chriscase [75.36.47.214] on Tuesday, May 22, 2012 at 20:35:58 :
I didn't run the fuel, break or gas line thru the center of the swivel because there is only about a 1/2" clearance between the swivel and the emergency break band. This is an original Truckstell and it has two pieces of angle iron welded to the bottom of the swivel. This is where I removed the original lines from and where I chose to run the new lines. There is not enough room to run the lines over the swivel, the cab would be in the way.
Steve in NJ