|
|
Posted by Keith in Washington [131.107.0.94] on Wednesday, April 18, 2012 at 13:43:25 :
In Reply to: Brake pushrod adjustment, 1951 B3PW, single circuit, not vac posted by Dammit! [99.120.34.172] on Wednesday, April 18, 2012 at 00:46:02 :
Adjust the push rod until there is about 3/4 to 1" of movement in the brake peddle before you feel any resistance. Then make sure that you have solid brake peddle before you even get close to the floor. Take your time and make minor adjustments until you get it fixed.