|
|
Posted by clueless [186.15.42.98] on Tuesday, April 17, 2012 at 22:29:40 :
the 62 tcs are mounted metal to metal, one is off the crossmember and there is no sign of anything being between the brackets and the crossmember, if there is, it is paper thin and the same size as the whole bracket as the bracket has left itīs mark on the crossmember
all the others look to be the same, bolted up tight to each other
I know, i need a manual
the open cab with the frozen 230 with the head missing does not show any oil leaks out of the the trans, tc, intermediate yoke housing and diffs and the trucks have been rolling around, if the seals were bad seems you would see some oil or at least a stain after rolling around, plus all of the drive line, ujoints and splines seem very tight except for the front of which the ujoints are well worn as are the splines, why would the front be so much more worn than the all of the rears
the driver has leaks on all pumpkins and transmissions, and the driveline is a tad sloppy
if the torsion bars are straight up and down and not canted over does that mean they are still good, out of all the trucks there are six that are standing straight
Follow Ups: