|
|
Posted by Desoto61 [138.162.0.45] on Thursday, March 29, 2012 at 11:49:24 :
In Reply to: Rotisserie on a lift? Cool! posted by Chris Case [76.212.212.13] on Thursday, March 29, 2012 at 08:59:01 :
The arms of my lift are adjustable, and the pads sit in holes on the ends of the arms, so for the frame I just removed the pads and hung the frame from chains. Prevented issues with weight shifting when the axles came loose and doesn't cover up as much of the frame when it's time to paint.
Figure I'll build the cross piece and cab supports but instead of putting it on legs I'll make "pins" that will fit into the arm holes on the lift.
When I was doing the floor and firewall I just used the arms to lift the cab from the top of the door openings and bring it up high enough I could sit on my rolling stool and work on the firewall or roll under the cab and work though the floor or door openings.