Re: Ok, Jerry in ID


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Jerry in Idaho [69.59.83.175] on Saturday, February 04, 2012 at 22:45:48 :

In Reply to: Ok, Jerry in ID posted by Nick [99.100.212.49] on Saturday, February 04, 2012 at 21:34:45 :

The glass travels down into the door at the latch side in the long piece you were having trouble with in the pass. door. It's possible it isn't seated completely into the little metal channel that hangs inside the door on that side. The other problem I had was the short rigid channel that fits into the bracket on the hinge side. This is the bracket held in place by 4 screws. I have never gotten one from VPW yet that worked. Always way too tight. I would suggest you take that short bracket and the window glass with you to the glass shop and see if they can fit a narrower channel into the bracket. That is what I did with my doors on my '46 WDX. I am glad I don't have the wing vent doors on this truck. They are nice, and they look cool, but they added more grief to the project in my opinion.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com