|
|
Posted by Bruce in BC [24.207.19.38] on Saturday, January 21, 2012 at 11:11:06 :
In Reply to: Nose Clip position posted by Brian Holt [64.180.202.47] on Saturday, January 21, 2012 at 08:38:43 :
just make most of the bolts loose and a few finger tight . You can then adjust the metal , shim if necessary and then tighten down a bolt here and there as things slowly line up .
Not uncommon to take a week to line up the doors and what not on a 32 ford - we are talking way high end silly here . So a morning on the rad nose on the PW is to be expected .
bruce
Follow Ups: