|
|
Posted by Kevin in Ohio [50.41.20.233] on Wednesday, January 11, 2012 at 07:49:41 :
In Reply to: Thinkning of springs posted by D Sherman [72.47.153.24] on Wednesday, January 11, 2012 at 01:21:27 :
If you have access to a lather you can make your own rivet and press/set it in a normal shop press. I drilled a blind hole and pressed a 45 degreed tapered punch into the backside and it makes a nice end result.
The extra holes on this spring leaf is for the factory poly slide shoes.