|
|
Posted by Dave K. Royal [75.81.249.81] on Tuesday, January 10, 2012 at 15:41:00 :
In Reply to: Re: Steel Glove Box & Cowl Vent Interferance - any one else? posted by Will (in IL) [98.215.26.138] on Tuesday, January 10, 2012 at 10:38:11 :
Will, the spring holes on mine were round instead of square and would bind before the door got open all the way. after they are trimmed you will have to add a small piece of rubber glued over the hole to keep stuff from falling thru. I also put two holes in mine on the side and installed two power ports,(new words for cigerette lighter) to be accessed from the inside of the glove box. works for GPS, phone charger, ect,ect. I put mine down about 1 1/2 inches and four inches back. didn't have to cut a ugly hole anywhere in the dash. most of our trucks have enough extra holes in the dash already! Dave.
Follow Ups: