|
|
Posted by mike stone [71.39.211.42] on Sunday, January 01, 2012 at 10:47:01 :
In Reply to: Timing problem posted by Brian Holt [64.180.202.47] on Saturday, December 31, 2011 at 16:09:52 :
do some more testing
determine the cause of the problem
check the primary lead from the coil to the
dist housing could be frayed a bit use an
ohm meter to check all the wires
clean all the ground connections
make sure the center contact in the dist cap
is in place
throwing parts at a problem is not the way to
go thats for sure