|
|
Posted by Kevin in Ohio [50.41.7.180] on Friday, December 02, 2011 at 14:05:11 :
In Reply to: Re: Well after 2.5 days, I'm still not a body man. posted by Will (in IL) [98.215.26.138] on Friday, December 02, 2011 at 12:37:55 :
Be aware, as I said, you MUST have a BIG tip gun. A group where One of the guys I work with bought a cheap Harbor Freight gun and opened up the tip. He offered it to do it for others so about 8 of us bought the guns and he did them all at once.
You only mix up a pint at a time and COMPLETELY clean out the gun after each run. The stuff sets up quick and you basically want to spray as fast as possible using the MAX thinner that is recommended. What makes it nice is that you can get such an even coat over irregular surfaces. You sand it dry like any filler. Sands way easier than any filler I've ever used and doesn't load up the paper.
From what I've learned it's the standard now on most high end paint jobs. Cost wise to me it was cheaper and easier than Rage filler.
Paul in NY told me about this place
http://autobodystore.com/forum/index.php
There is a wealth of info in there if you do some searching. I learned TONS there. Kevin