Running Boards Installed


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by kenaigary [65.74.51.21] on Saturday, November 12, 2011 at 21:29:09 :

I installed the boards on my 61WM300 today and they look great. Only took about 2.5 hrs for me and a buddy to take off the old half boards and put the new full length ones on.

Thanks to Dan M. for an outstanding product, including the new anodized braces he sold me. Everything lined up great, the boards were true and they went on very well. One note, I bought new board bolts from VPW and they are about 1/8th inch longer than the originals on my truck which created a problem on the driver's side center strut as the new bolt was about 1/16th inch too long. I used one of the old bolts and will put on three coats of black high gloss rustoleum.

My 61 is now looking like it should (at least as far as I'm concerned). I had to have the full length boards. It means clearing off more snow from the surface, but that's OK. I figure my PW has more surface area to clear than my 2008 F-350 had, but that's OK!



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com