Re: Cab mounts revisited


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Jerry in Idaho [69.59.83.175] on Thursday, November 03, 2011 at 16:57:25 :

In Reply to: Cab mounts revisited posted by Nick [99.100.212.49] on Thursday, November 03, 2011 at 14:24:09 :

The positioning of the wood blocks is pretty obvious, once you get under the truck and jack the cab up about 3". There is an angle on one side of the block that is relieved a bit to clear a little flange on the bottom of the cab. They will really only go one way. As Tom and Marty have said, you may need to add some rubber shims. I had to add 3/8" rubber between the blocks to get the hood to fit correctly. NO BLOCKS in the rear. NO SPRING on the driver's side.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com