|
|
Posted by Jackson in Ca. [75.38.63.39] on Saturday, October 15, 2011 at 13:57:46 :
In Reply to: engine replacement posted by Robert [68.96.73.101] on Saturday, October 15, 2011 at 12:44:48 :
Robert,
When I replaced my M-37 engine with a long block I also replaced the clutch and pressure plate with the 11" assembly from a 1 and 1/2 ton Dodge. If I remember correctly the flywheel on the M-37 is drilled for the 10 and 11" assembles. If not use a 1 and 1/2 ton flywheel. Put in a new throw-out bearing and pressure plate. This is the single most important upgrade you can do on these trucks. The power transfer is 100% smoother and you will stop breaking those valuable axles. Much easier on the leg and way better for off road and winch work.
Jackson
Follow Ups: