|
|
Posted by Fleabag [96.60.222.95] on Friday, October 14, 2011 at 13:57:52 :
The Wdx I bought for the 6x6 conversion had a very thin strip of rubber type material on top of the rear cab mounts between the mount and bottom of cab. It has the bolts that go thru the spring that is about 6 inches long, that was on three mounts and the drivers side has the bigger solid bolt for the front drivers side. I believe everything is original but the rubber type thin about 1/8th inch stuff that was on the rear mounts. Question is could someone that has an original set up on their truck measure and see how thick the piece of rubber between the cab rear cab mount and the bottom of cab is and also measure how much clearance between the back of the cab and the frame rails? Couple of pics emailed or posted would also help me out. Thanks Fleabag!!
Follow Ups: