|
|
Posted by Daryl in Oz [210.50.228.4] on Thursday, September 29, 2011 at 17:49:55 :
In Reply to: Re: 218 5A industrial engine posted by Kaegi [24.16.253.154] on Thursday, September 29, 2011 at 12:24:32 :
Depends on what it was used for, as some have cams and distributors set up for constant rpm operation. If you find it totally gutless at low rpm, try a conventional distributor. If it's been in a driven application, it should be fine.
Follow Ups: