|
|
Posted by Randy on Long Island [74.108.123.167] on Wednesday, August 03, 2011 at 19:27:39 :
In Reply to: Slant 6 distributor replacement advice? posted by D Sherman [72.47.9.228] on Wednesday, August 03, 2011 at 18:14:25 :
Many years ago I replaced the drive gear on a Chysler Marine slant six. The replacement gear was of beefier construction and had to be drilled out to fit the shaft...not the other way around. Simple drift pin installation. Held up real well under continual high RPM marine use. Never stripped again.