|
|
Posted by Bruce in BC [24.207.112.155] on Wednesday, June 22, 2011 at 21:54:37 :
In Reply to: Bruce in BC posted by Bob Jr [207.119.117.96] on Wednesday, June 22, 2011 at 17:55:20 :
There may be some pictures of my springs over on the Carryall thread .
http://www.powerwagonadvertiser.com/forums/showthread.php?t=5521
Is your 79 dana 60 a ford axle ? If so you can move the perches to whatever position you wish . I used the stock Dodge 93 cummins truck springs on my front end . The most common method for locating the front spring eyes is to use a piece of 2x3 tubing that sits under the frame. You weld the spring eye perches to the tubing and then bolt or weld the tubing to the frame . Take a look at a straight axle swap on a Toyota and you will get an idea of what I am talking about .
I can post pictures on the Carryall thread , but why don't you have a look at the 60 pages or so and this will give you some ideas and a place to start . Also hit up Paul's site which I have marked on page one . I am glad to offer any ideas and moral support .
Take care
Bruce
Follow Ups: