"Cape chisel" , cut a slot as far as possible.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by ChrisCase [75.36.38.11] on Wednesday, June 01, 2011 at 16:10:26 :

In Reply to: Removing bushing from front spring mount posted by Larry - Orlando [99.189.142.208] on Wednesday, June 01, 2011 at 15:54:28 :

Or just use a hack saw assembled with the blade through the hole. Try to cut it horizontally, so any over-cut is not in the area most needed for support.

Probably don't need to cut it all the way, enough too allow it to get driven out.

You also might try making a puller out of a couple deep socket or peices of pipe, and a long bolt, then whack it too if the puller won't do it alone.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com