Re: axle interchange question


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Sean Butler on Monday, January 22, 2001 at 0:08AM :

In Reply to: axle interchange question posted by mike (aka packrat) on Sunday, January 21, 2001 at 6:08PM :

Powerwagon was the civi truck. The military ones were 1/2ton "WC's" or 3/4ton "W/C's" and during korea and vietnam they were M-37's. If you are asking if the military axles and differentials will fit into a civilian axle housing, they will. The 1/2 ton's required modification.
The 3/4ton and M-37 differential are identical to the civilian powerwagon . The axle shafts on all four trucks are different. The civilian axle is longer and has an offcenter diff. The WC's had centered diffs, and the M-37 is offset, but it's shorter than the civilian axle housing. Hope this answers your question. It was hard to understand. All hubs are interchangeable except the 1/2ton WC's, they used a smaller spline.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com