Posted by Greg Coffin on Wednesday, January 17, 2001 at 11:18PM :
In Reply to: A/C compressor to on board air posted by The Other Ross on Wednesday, January 17, 2001 at 8:12PM :
Tim's right - if the York has a filler hole for the oil sump your done. If not, you can get a York (big square looking thing) off Chryslers or Fords. The key is the oil sump. Or you can go with a Harrison DA-6. You can find them on GM stuff through at least 1983. They are a 6 cylinder design that is very durable, and one nice thing is they are long and skinny if you have a tight spot to squeeze it into. A couple years ago NAPA sold them new for $150 +13 for core. A friend of mine had one on his truck and it would run all day without a problem. Good luck - Greg
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |