Posted by Desoto61 [138.162.0.44] on Friday, May 13, 2011 at 07:20:04 :
In Reply to: Re: FFPW Body Panels posted by JohnD [71.246.88.163] on Thursday, May 12, 2011 at 20:14:32 :
That was my plan. Do the flat piece with the bottom bend. Then do the top bend and weld them together from behind.
Neighbor has a small brake that might work with the 16 ga. if not the local metal shop should be able to do it for a few $$ quickly.
Need to make some friends in the sheet-metal shop here at work!