Posted by Paul (in NY) [12.64.146.166] on Saturday, May 07, 2011 at 21:07:59 :
In Reply to: Rear wheel bearing part numbers posted by Mark [24.177.1.173] on Saturday, May 07, 2011 at 18:14:16 :
Rear Hubs
Inner Cone Timken 28682......NAPA BR28682
Inner Cup Timken 28622......NAPA BR28622
Outer Cone Timken 2984......NAPA BR 2984
Outer Cup Timken 2924......NAPA BR 2924
If your bearing is truly .003" smaller than the spindle shaft it sure wont push on easily . You may have a mis marked bearing or a spindle shaft that is galled. I have never Mic'ed the ID of these bearings or the OD of the spindle shaft. I have always had a nice fitting when installing.
Paul
Follow Ups: