|
|
Posted by David Sherman [72.47.9.228] on Wednesday, February 09, 2011 at 18:35:24 :
In Reply to: No....you misunderstood... posted by Jerry in Idaho [64.139.238.43] on Wednesday, February 09, 2011 at 15:48:50 :
But still it seems like the saw is only going to cut about 6" deep, maybe 8" at the most, which is just scratching the surface of this wall. Current plan A is to drill holes around the perimeter, get a sharp point bit for the roto-hammer and see where that gets me. Plan B is pyrodex. Not much room to swing a hammer there. I'm not bad at swinging a double-jack (I busted up an entire concrete garage slab and hauled it off once), but there has to be room to swing it.