No....you misunderstood...


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Jerry in Idaho [64.139.238.43] on Wednesday, February 09, 2011 at 15:48:50 :

In Reply to: Thanks for the ideas posted by David Sherman [72.47.9.228] on Wednesday, February 09, 2011 at 12:23:28 :

or I didn't say it right. "you get an overcut equal to about 1/3 of the diameter of the blade." By this I meant that if the blade is 18" in diameter, and you want to saw a 3' x 3' space, the blade will cut roughly 6" beyond the 3' in each direction, in order to get the full depth of the cut. But with all the rock in there, you might be better off worrying a hole through with the electric jackhammer, like was suggested by one of our fellow Idahoans, along with skillful use of a 16# sledge hammer.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com