Re: What am I missing here?

Posted by Vaughn [99.33.230.173] on Saturday, February 05, 2011 at 21:30:36 :

In Reply to: What am I missing here? posted by Nick [99.100.212.49] on Saturday, February 05, 2011 at 19:59:09 :

If the front drive shaft uses the mechanics UJ, use a NAPA 853. You will have to grind about .010 off each end so the lock plate will lay flat.

All other UJs use the OSN 7705710 or 7744199 UJ that you can get from MV suppliers for the M37. NAPA has no replacement.

Follow Ups:

• Rear UJ for front drive shaft - Vaughn 12:17:23 02/06/2011
• Thanks Vaughn.................ntxt - Nick 22:09:06 02/05/2011
  • Re: Thanks Vaughn.................ntxt - Vaughn 10:14:16 02/06/2011
    • Ok, ......... - Nick 12:12:54 02/06/2011

Post a Followup