|
|
Posted by Paul (in NY) [12.64.186.101] on Tuesday, February 01, 2011 at 20:48:48 :
In Reply to: Re: Sure it's not the pinion seal? posted by Jim (Maine) 48 PW [74.82.68.32] on Tuesday, February 01, 2011 at 20:35:38 :
Drill two holes in the steel seal housing, to fit the large screw on the end of a slide hammer. Screw it in the holes you drilled and a couple of hits with the slide hammer and it will come right out.
Paul