Let the drip sit as long as possible


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Bruce in BC [24.207.16.199] on Sunday, January 30, 2011 at 23:06:55 :

In Reply to: Re: 6x6 progress posted by dan m [71.116.25.84] on Sunday, January 30, 2011 at 18:36:47 :

Then take a razor blade to a wet stone and abrade only one edge , by doing this you will make a little burr . Use this to scrape the top off the drip . Once it is level then wet sand and buff it out . This is how drips were fixed in the long dark past . It works very well . The only problem you may run across is the moleculer structure in the drip may be organized differently than the surrounding paint . Even though the drip is now dead flat it can still be seen by a 1% er . Most folks would never notice . This method should be on the internut someplace .

Bruce



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com