|
|
Posted by Keith in Washington [24.41.44.238] on Friday, January 28, 2011 at 19:06:50 :
In Reply to: wiring harness posted by Jerry in Idaho [64.139.238.43] on Thursday, January 27, 2011 at 21:58:09 :
Jerry:
If you are staying with 6 volts make sure your wires are heavier. Use the same gauge that is in the original wires. Do not use the thinner wire that they use on 12 volt systems. 12 volt systems use a much smaller wire than 6 volt systems.