|
|
Posted by Will (in IL) [98.215.26.138] on Wednesday, January 19, 2011 at 17:20:42 :
In Reply to: Stuck Governor posted by Will (in IL) [98.215.26.138] on Tuesday, January 18, 2011 at 17:50:55 :
I pulled the carb off and nothing is stick. Re-installed it with a new gasket, and while re-connecting the linkage it became clear there was a binding. It turns out that the new, slightly too-thick cab mounts are the problem.
The accelerator pedal rod is rubbing on the bottom of the hole when the pedal is fully released, and not allowing the linkage to fully return to idle. If I force the linkage back, and start the truck it runs great and hold 40 pis of oil pressure.
Once the s0n-in-law brings over the shortened blocks, and I install them I'll be all set (I hope).
Now to fabricate the exhaust.
Thanks,
Will
Follow Ups: