Posted by Dozerman51 [71.139.194.78] on Saturday, January 08, 2011 at 19:32:55 :
In Reply to: Re: Help on 236 installation on 1/2 ton WC frame posted by Kaegi [71.227.129.92] on Saturday, January 08, 2011 at 02:24:23 :
Thanks for all the advice. I would like to keep the motor mounts in place so later on, if I had to, I could install a short block back without any problems. Just wanted to make sure that by mounting the support plate on top of the engine mount and crossmember, the angle would not be to high to cause any problems with the driveline.