|
|
Posted by dc [75.170.28.106] on Saturday, January 08, 2011 at 13:44:00 :
In Reply to: Help on 236 installation on 1/2 ton WC frame posted by Dozerman51 [71.139.194.78] on Saturday, January 08, 2011 at 01:55:27 :
the way I've always done it is to weld a pieces of strap 2"W x3"L steel to the front support plate mount that bolt to the eng and drill to fit were the motor mounts in the frame are , but I've seen guy just drill thru the frame straight down right were the front support plate end up setting . both worked