Posted by Will (in IL) [98.215.26.138] on Tuesday, January 04, 2011 at 16:05:40 :
In Reply to: Re: Crank Pulley posted by Kaegi [71.227.129.92] on Tuesday, January 04, 2011 at 15:21:19 :
Just pulled the M's 230 crank pulley off and held it up to the 46PW and it will clear with about 3/8" clearance. I'll have to have the belt in place before I bolt the front of the engine down and hope I don't have to change belts at some point.
I've got all the top side items (and front clip) pulled so for this afternoon, now to see how hard it will be to undo the tranny/bell housing.
Sure don't like the idea of pulling the hole assembly with the brake pedal not having room to clear the bell housing. Wonder if I should pull the tranny, and then pull the engine leaving the bell housing in place?
Will
Follow Ups: