|
|
Posted by Keith in Washington [24.41.44.238] on Thursday, December 30, 2010 at 13:32:09 :
In Reply to: Carburator rebuild posted by Fleabag [96.60.220.17] on Thursday, December 30, 2010 at 07:20:56 :
Reuse the jets that are in the carb. Most rebuild kits have smaller jets so you truck will run lean. You can compare jet sizes between new and old with a set of numbered drills.
Be sure to use the new float needle valve and seat as the one in the trck will most likely be worn.
You may not have to rebuild the carb. It may have a little varnish or elude that you can flush with some carb cleaner. Pull the carb top and see what you have.