Posted by Terry [65.95.155.170] on Saturday, November 27, 2010 at 09:22:56 :
In Reply to: Is a special tool required... posted by rick pacholski [98.26.211.168] on Saturday, November 27, 2010 at 08:46:25 :
I just welded up a cross of keystock to a socket that would fit inside the retainer nut. It does not have to be complex. My diff was originally taken apart by a clown with a punch and hammer. What a mess on the nut and bearing bores. If you need to remove the inner pinion bearing you will need a special press plate or carefully grind the bearing off ( carefully). Terry.