|
|
Posted by Grant in CO [64.234.252.6] on Sunday, November 21, 2010 at 11:48:03 :
In Reply to: wHAT DO YOU DO ABOUT STICKING VALVES?? posted by junior [64.136.27.226] on Saturday, November 20, 2010 at 18:54:59 :
Clint, I had sticking valves due to old gas in a TW with slant 6 that had not run in 10 years plus. Bent a few push rods. I used marvel mystery oil, Rislone, ATV and penetrating oil dripped on the offenders and wacked them with a rubber hammer. Down down then they would pop back up. I did this couple times a day for a couple of weeks. Patience! I also put marvel mystery oil in the gas and oil and Rislone in the oil. Seems crude, but it worked great. Clean out the tank and fuel system well. Gar
I use Prolong additive with Valvoline in my 318P TWPW. It might work well too. Clings to the metal well.
Follow Ups: